GOOT Conventional Dispenser Pack Desoldering Wicks

GOOT Conventional Dispenser Pack Desoldering Wicks

Feature:

• Quickly removes unwanted solder when used with a soldering iron.
• Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
• To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.
• Do not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.
• Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB.
• Different Size for choose. 

Use:

• Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
• Remove the desoldering wick after the solder has been absorbed.
• Cut off the used section of the wick using nippers.

FOR LEAD-FREE DESOLDERING

Our thin and soft desoldering wire flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks. Recommended for lead-free solder with high heating load.

RMA base flux.

High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux. Can be used for precision PCBs safely.

SPECIFICATIONS