TBK-958 Aluminum Alloy Automatic Separator Touch Screen Repair Machine

TBK-958 Aluminum Alloy Automatic Separator Touch Screen Repair Machine 

Feature:

• Code：005
• Model：TBK-958
• Supply：AC220V
• Power：300 W
• Size：300*480*230mm
• Weight：15.5kg
• Carton：550*370*310mm
• G.W.：18kg

Main Features :

1. Enough heating metal plate: for mobile phone universal;
2. Built-in Vacuum Pump, low noise, no need fixture screws or outside heavy connect any more.
3. Safety power system inside, avoiding the electric leakage problem;
4. Anti static body material, prevent the LCD and the flex cable being damaged from the static;
5. Easy to operate, automatic separating; 
6. Smooth metal plate to hold the touch screen without any damaged;
7. Power supply: AC 85V to AC 265V 50Hz, almost for users from all over the world;
8. Temperature should be set to 80 centigrade to 100 centigrade,when you do the job on iPhone and galaxy series ect;
9. Compatible for LCD or LED screen assembly;
10. Safety power system to avoid leakage.

Introduction :

1. More convenient : This Latest Upgraded LCD Separator Machine with Vacuum Pump Built-in, combined the advantage of the automatic LCD separator and the Vacuum LCD Separator, get rid not only of the traditional fixture clamps or screws, but of the heavy Vacuum Pump.
You do not worry any more whether the LCD is fixed well when you work.

2. Lower noise & lighter weight : With vacuum pump inside, there are lower noise, upgraded design, we light the weight after improved the traditional heavy vacuum pump, you\'ll not have to burden the extra shipping cost.

Operating :

1. Install the wire on the machine bar. Keep the wire and the mould even ;
2. Put your lcd with touch screen on the metal plate, lcd side above ;
3. Turn on the machine and wait for the metal plate become 80-100 degree ;
4. Start to push the mould gently and slowly until the lcd automatically separated from the glass. (If the glass is totally broken, please stick a tape on the surface of the glass to make it easy to separate and avoid it hurt the lcd.) Generally just one time you can take the glass off ;
5. Finally you will find yourself do a good job; now start to get a well pay business !

Note :
1. Must ensure the machine connects ground wire;
2. Do not let air flow blows on the plate directly, or it will affect the heating machine.