YIHUA 853D 5A 3 IN 1 Large DC Power Supply Rework Soldering Station With Hot Air Gun

YIHUA 853D 5A 3 IN 1 Large DC Power Supply Rework Soldering Station With Hot Air Gun

Features

1, the machine is based on the current the communications market demand independent innovation subversive

design using the latest chip technology design integrated 30V/5A DC power supply, hot air gun reworks, soldering station,

 3 functional integration! it occupies less area, practical and saves energy, function powerful ,a 

machine can all conventional application basically meet!

2, Temperature controlled part of the master core technologies, use SAMSUNG microcontroller chip PID program, high speed 100ms cycle real time tracking of the wind gun outlet temperature and the temperature of the iron tips, and real time correction. The temperature is high stability.

3.PID rapid correction of the high speed 100ms temperature, high energy efficiency conversion, at a constant temperature state power consumption much lower than similar machines, more energy efficient!

4.Iron handle line also use the high temperature silicone cable(soldering tips of 300 degrees touch silicone line 30s without damage), the heating element use Imported heater, high power, fast temperature compensation, except for general solder joint desoldering also particularly suitable for desoldering crude terminal, solder joints, miscellaneous difficult solder joints.

5.Air gun handle lines with high temperature silicone line, mute brushless fan, stainless steel tube, latest 

technology ceramic skeleton heater, stability and reliability high.

6.The highest security, the original the ABS fan antilock function, when the fan abnormal stop working stability 

out of control, the system immediately cut off the air gun power, user of security and environmental safety.

7.Inside initiate air gun handle safe protection, the circular telegram start up at every time , the handle must  put up on the air gun frame , then the machine will begin working regularly. If not put the handle on air 

gun frame,the main unit can not safety directs, therefore the machine will not work. It's purpose is to effective 

prevention of air gun in unknown circumstances on hold in other parts of fire or other accidents.

About PID program description

Core algorithm to measure, compare and execution for a period often divided into rapid 20ms, high speed the 100ms, fast 200ms applications in a hot air gun and soldering iron temperature control.

Temperature accuracy and stability are the most important parameters.Rapid 20ms algorithm in the case of AC220V 50HZ, 50Hz each half wave cycle of 20ms, the program has been accurate to control each supply cycle.

The top level in the industry. YIHUA variety of high end models hot air gun with a rapid 20ms, soldering iron temperature correction for high speed 100ms fast 200ms two standard temperature sensor located inside the ceramic heating core, the temperature passed to the soldering iron mouth and then fed back requires a certain time consuming, high speed 100ms for each cycle is the optimum control speed. (Inline great part of the programmed cycle can only reach 200ms~500ms)

Main function

1. YIHUA 853D 5A 3 in 1 hot air soldering station with hot air gun and 30V 5A DC power supply . Improve your working efficiency. Better organize. Save time, save space and save energy. The three sections have their own switches, can work independently or together. 
2. The heart of this station is Dual-core microcomputer processor and PID technology to trace temperatures on air gun and iron in real time and compensate temp precisely and quickly by built-in PID control program. So keeping temperature stability within 1oC and quick temperature rising to set value. ESD design on soldering iron section can protect sensitive components.  

3. Designed for SOIC, CHIP, QFP, PLCC, BGA and temperature-sensitive components. Soldering iron with anti-static design to prevent electrostatic damage on dedicated SMA components. Very good for electronics product, such as cell phones and smart handsets repair.

4. The power supply is high-precision DC power supply with Constant Voltage and Current, output voltage:0-30V DC adjustable, output current :0-5A adjustable, Power supply with overload protection, high accuracy, reliability, designed for scientific research, product development, laboratories, schools, portable computer repair, electronics production lines etc.

5. Enhanced safety features. Full intelligence self-detection functions on air gun and iron to provide safe operation mode. Sensor on handle leads to operating mode (high temp) when picked up or to standby mode (low temp) when laid down. Avoid accident caused by human mistake.

6. The air gun automatically enters standby when the temperature is less than 70oC threshold.

7. With short circuit, open circuit, over-temp and over-load protection.

8. Automatic cooling function for effectively prolonging the heater's life and protecting the hot air gun. 

9. Fits for heating shrink, drying, lacquer removal, viscosity removal, ice-out, pre-heating and glue soldering.

10. CE approved.

Technical Data

• Power consumption: ≤1000W
• Measurement: L253XW186XH124mm ±5mm
• Working environment: 0~40°C/32!104°F
• Storage environment: -20-80°C/-4~176°F
• Weight: 8KG
• Store humidity: 35%~45%

Hot Air Reworks

• Airflow type: brushless fan gentle wind
• Aiflow: ≤120L/min
• Temperature range: 100°C-480°C/212°F~896°F
• Temperature Stability: ±1°C(static)
• Display Type: LED Digital Display

Soldering Iron

• Temperature range: 200°C-480°C/392°F~896°F
• Temperature Stability: ±1°C(static)
• Tip of ground voltage: <2mV
• Tip ground impedance: <2 ohm

DC Power Supply

• Output Voltage: DC 0~30V
• Output Current: 0~5 adjustable
• Load stability: <0.01% ±2mv
• Temperature coefficient: <300ppm/°C
• Ripple dB: <1mvrms(virtual value)

Whats In The Box

•  main unit + gun + power cord
•  instruction manual
•  soldering iron
•  soldering iron holder +gun frame
• 4 nozzles

Application Scope

1) Electronic product assembly for industrial production

2) Product development for scientific research departments

3) Repair industry for electronic product inspection and maintenance

4) Soldering operations for electricians in various enterprises and institutions

5) Electronic assembly for electronic technology enthusiasts

6) Student skills training  for a variety of electrical colleges

7) Suitable for a variety of component desoldering and soldering, such as: SOIC, CHIP, QFP, PLCC, 

BGA, SMD, etc.

8) Suitable for heat shrinking, drying, painting, adhesive removal, thawing, preheating, plastic welding, etc.

9) DC power supply suitable for scientific research, product development, laboratories, laptop 

maintenance, etc.