i2C FACE ID Dot Matrix Cable for V8 i6S Programmer

In stock
365 days
Price in points: 55 points
Weight: 0.200 kg
Payment options
Our advantages

i2C FACE ID Dot Matrix Cable for V8 i6S Programmer

1: The flex cable can only be used with the IFace V8  programmer;
2: The  flex cable  cannot be used separately;
3: If there is no programmer, the flex cable can not be used.

Iface V8 Programmer Fix iPhone Face ID Not working on X-11 pro max, Face ID Repair Tool - Iface Pro V8 Programmer, don't need to disassemble & Reballing the encrypted chip, just replace the dot matrix cable, repair iPhone Face ID issues no working.


1. Offline read & write

2. Support models: For iPhone X/XR/XS/XS Max/11/11 Pro/11 Pro Max/12/12Pro/12Mini/12ProMax

3. Support Chinese & English menu switch

4. Non-trace repair, green pass the 3UTools

5. Chip non-removal low repair risk

6. Low power consumption and no current leakage

7. Can be adapted to the latest iOS system perfectly

Operation Process

1. Connect with the original flex cable, press the ‘Test’ button to test the flex cable condition

2. Press the ‘Read’ button to read and save the data (Do not power off during the operation process to avoid loss of data )

3. Connect the i2C dot projector flex cable with the host machine, then press the ‘Write’ button to write the data. (Do not power off during the operation process to avoid loss of data)

4. Cut off the shielding cover soldering joint pads with grinding pen

5. Heat with a hot air gun and separate the dot projector board from the glass lens with a sculpture knife

6. Take down the MOSFET then short the pin as shown in the figure

7. Reball the pads on the flex cable

8. Apply solder paste then solder the dot projector board to the flex cable

9. Test the flex cable working condition after the soldering

10. Put the flex cable into the shielding cover and keep the flex well aligned with the glass lens


iPhone XS Max
iPhone 11,11Pro,11Pro Max

iPhone 12/12Pro,12Mini,12ProMax
iPad A12X

1: Offline Data reading
2: Burn Free
3: Chinese / English
4: Perfect repair
5: No Risk free chip repair
6: Low power & No leakage
7: adapter IOS14.*

i2C FACE ID V8 Programmer Fixture for iPhone X/XS/XsMax/XR/11/11Pro/11ProMax

Cable for iPhone 11
iPhone Models
  • iPhone XR
  • iPhone XS Max
  • iPhone XS
Find similar

No reviews found

LCD Screen Grades

ConditionDescriptionLCDGlassFlex CableFrameAppearance Intactness
Aftermarket BasicChina LCDJKAftermarketAftermarketAftermarketNew
Aftermarket StandardFlex Cable ReplacedOriginalAftermarketOriginalAftermarketNew
Aftermarket SelectedGlass ReplacedOriginalAftermarketOriginalAftermarketNew
Original PullsPull From Used DevicesOriginalOriginalOriginalOriginalNew Alike
OriginalOriginal Equipment ManufacturerOriginalOriginalOriginalOriginalNew

In Union Repair store, we grade our iPhone screen into 5 different types of quality on the basis of different material assembled. The following is the full details of each condition.


After Market Basic

It is with widely accept major complaint replacements for original parts, which keeps a right balance between price and quality. It has sustainable supplying chain in China, and all the components of the screen are copy quality. Typically, the LCD screen is from several different factories, the most popular 4 on China market are JK,AUO, LongTeng, and ShenChao. By comparing the brightness and sharpness of the LCD, we found JK is the best quality among them and the second best is AUO. No doubt, the other components on the screen are all copy.


After Market Standard

It is better than After Market Basic cause it comes with original laminated flexes and the LCD panel. Other components like touch panel, frame(hot pressed), backlight, polarize lens, and OCA is all copy from different factories.


After Market Selected

The core components (like LCD and flexes) is 100% original pulled from used iPhone while the frame and touch panel is copy. The touch panel and frame come together with cold pressed glue and assembled together with the LCD by the capable third-party factory which keeps its excellent quality. 


Original Pulls

No doubt, it is tear down from used iPhone with all the parts 100% original and working perfectly just like an original new screen, it has whatever the original new screen has. The only complaint about this quality is that some of the displays are with 1 or 2 scratches but still be welcome by our critical customers who are requiring good quality.


Original New

It is 100% original from Apple-authorized factories like Toshiba, Sharp, and LG. We get this kind of screen from the first level dealer. The touch panel of the screen is oleophobic coated which prevents from fingerprints when using your iPhone. And starting with iPhone 7g, the backlight from different authorized factories comes with a different code. Backlight from Sharp has the code begins with DKH/CON, from Toshiba begins with C11/F7C/FZQ, from LG begins with DTP/C3F. 



You may be interested
  • Similar products
  • Also bought
  • Recently Viewed
Fast and high quality delivery

Our company makes delivery all over the country

Quality assurance and service

We offer only those goods, in which quality we are sure

Returns within 30 days

You have 30 days to test your purchase