JBC NASE 2C Nano Rework station
JBC NASE 2C Nano Rework station
- 120 V NASE-1C (Reservation is required for about 10 days)
- 230 V NASE-2C
- 100 V NASE-9C
The best solution for repairing very small-sized components requiring the highest precision such as chips 0402, 0201, 01005, etc. It works simultaneously with the NT115 Nano Handpiece and the NP115 Steady Nano Tweezers. The short distance from the tip to the handle offers maximum control even when using a microscope.
The NASE-C comes with the new Temperature Dynamic Profiles functionality. The use of these profiles allows you to control the temperature of the component during all the phases of the soldering process, emulating the heating process in a reflow oven.
Provides the best solution for ultra-small parts that require the highest precision, such as 0402, 0201, 01005 chips.
It works with two NT105 nanometer soldering pens and NP105 stable nanometer tweezers.
Even when using a microscope, the short distance from the tip to the soldering pen provides maximum control.
It comes with JBC's unique heating system and intelligent sleep and hibernation.
It has all the advantages of the Excellence Series.
With a simple manual to help you monitor your work in real time: graphics, partial soldering stations, tool port monitoring and more.
Ambient operating temperature: 10-40 C (50-104 F)
Communication connector: USB-A / USB-B / Pedal
Size: 170 x 90 x 135 mm
Idle temperature. Stability (still air): 3 C (5.5 F)
Input fuse: 0.5A / 0.2A / 0.5A
Output peak power: 14W per tool
Packing size: 280 x 280 x 164 mm
Package weight: 3.6 kg
Robot connector: RJ12 for RS-232 protocol
Temperature selection: 90-450 C (190-840 F)
Resistance between tip and ground: <2 ohms
Voltage: 120V / 230V / 100V
Weight: 4 kg
- C105-101 x1
- C105-103 x1
- C105-105 x2
- C105-107 x1
- C105-112 x1
- C105-113 x2
No posts found
LCD Screen Grades
|Condition||Description||LCD||Glass||Flex Cable||Frame||Appearance Intactness|
|Aftermarket Basic||China LCD||JK||Aftermarket||Aftermarket||Aftermarket||New|
|Aftermarket Standard||Flex Cable Replaced||Original||Aftermarket||Original||Aftermarket||New|
|Aftermarket Selected||Glass Replaced||Original||Aftermarket||Original||Aftermarket||New|
|Original Pulls||Pull From Used Devices||Original||Original||Original||Original||New Alike|
|Original||Original Equipment Manufacturer||Original||Original||Original||Original||New|
In Union Repair store, we grade our iPhone screen into 5 different types of quality on the basis of different material assembled. The following is the full details of each condition.
After Market Basic
It is with widely accept major complaint replacements for original parts, which keeps a right balance between price and quality. It has sustainable supplying chain in China, and all the components of the screen are copy quality. Typically, the LCD screen is from several different factories, the most popular 4 on China market are JK,AUO, LongTeng, and ShenChao. By comparing the brightness and sharpness of the LCD, we found JK is the best quality among them and the second best is AUO. No doubt, the other components on the screen are all copy.
After Market Standard
It is better than After Market Basic cause it comes with original laminated flexes and the LCD panel. Other components like touch panel, frame(hot pressed), backlight, polarize lens, and OCA is all copy from different factories.
After Market Selected
The core components (like LCD and flexes) is 100% original pulled from used iPhone while the frame and touch panel is copy. The touch panel and frame come together with cold pressed glue and assembled together with the LCD by the capable third-party factory which keeps its excellent quality.
No doubt, it is tear down from used iPhone with all the parts 100% original and working perfectly just like an original new screen, it has whatever the original new screen has. The only complaint about this quality is that some of the displays are with 1 or 2 scratches but still be welcome by our critical customers who are requiring good quality.
It is 100% original from Apple-authorized factories like Toshiba, Sharp, and LG. We get this kind of screen from the first level dealer. The touch panel of the screen is oleophobic coated which prevents from fingerprints when using your iPhone. And starting with iPhone 7g, the backlight from different authorized factories comes with a different code. Backlight from Sharp has the code begins with DKH/CON, from Toshiba begins with C11/F7C/FZQ, from LG begins with DTP/C3F.
- DHL start from $20
- Worldwide - from $25
- Western Union
12 months warrantyGuarantee for all purchased goods in our online store is 12 months
SMS notificationYou receive SMS messages about each stage of your order.
Return and exchange - no problemВы можете вернуть купленные товары в течение 14 дней. Товар должнен быть в нормальном состоянии и иметь все заводские упаковки.
Different payment methodsPay orders in convenient ways: cash to the courier, by bank transfer on the receipt of the bank or by credit card right at the time of the order.
Best priceWe are proud of our prices, hundreds of customers check them every day, which give a choice to our online store!